The C.Scope Cable Avoidance Tool is a 3 mode locator which will detect  signals radiating from pipes and cables.

The C.Scope XD Cable Avoidance Tool is a high precision locator, similar to the standard model, additionally capable of measuring the depth of a pipe or cable.

The C.Scope SG-A and C.Scope SG-V Signal Generators operate in conjunction with a C.Scope locator operating in the Generator mode.  The Signal Generators generate a 33kHz radio signal which can be applied to a cable or metal pipe to allow it to be traced.  A range of accessories are avalible to allow specific applications, such as plastic pipe tracing.

The C.Scope SG-V Signal Generator adds a digital display to provide precise information about the battery condition and quality of connection achieved.

The C.Scope CS880 is a neat solution to the problem of pinpointing the position of metal covers buried under earth or tarmac.

C.Scope Plastic Pipe Tracers are an innovative solution to the problem of tracing the route of non-metallic pipes and conduits.  In use the Tracer is inserted into the pipe and pushed into it as far as is required.  The C.Scope Signal Generator is connected so that the Tracer radiates a signal detectable by a C.Scope locator operating in the Generator mode.

The C.Scope Sonde is a small battery powered transmitter which, in typical use, would be screwed onto the end of a drain rod (a range of drain rod adaptors are available), and pushed down a pipe so that the pipe direction can be traced using the C.Scope locator set to 'Signal Generator Mode'. The location of a pipe blockage can be identified using this system, with enormous cost saving potential.